Chapter 4 Interpreting Test Results
About the results
About the results
Modem emulate results
56
–
"FTP/HTTP results" on page 73
–
"ATM general results" on page 74
–
"ATM OAM results" on page 75
–
"JDSU QoS results" on page 77
After the HST-3000 has synchronized with the DSLAM, the
unit will immediately display results on the LCD. You can view
many additional results by pressing the Display soft key and
selecting other results screens. The available results will
change depending on the test configuration and the SIM
version.
The following result categories are available in Modem
Emulate mode:
– Summary
– Vectoring
– Errors
– G.INP
– Performance
– Signal
– Band Statistics
– Graphs
– Identity
– Event log
The following sections describe the results in each category.
HST-3000 xDSL Testing User's Guide