Chapter 2 DSL Testing
About the xDSL testing applications
About the xDSL testing applications
Testing in single-line modem emulate mode
12
When you power up the HST-3000, the xDSL Measurements
menu appears.
NOTE:
Your screen may look different, depending on the options
installed on your unit. For example, VoIP and Video are
options, so they may or may not appear.
The applications on the XDSL tab apply to single-line DSL
tests.
The applications on the VDSL BOND or ADSL BOND apply to
bonded DSL tests.
In modem emulate mode, the HST-3000 replaces the modem
(terminates the line instead of the CPE).
The modem emulation test involves the following steps:
– selecting modem emulate mode and specifying test
settings
– connecting to the line
– performing the tests
HST-3000 xDSL Testing User's Guide