Create And Process Graphic Elements; Figure 44 - Graphic Editor (Create Graphic) - Leibinger JET2NEO Manual

Group 7

7.2.2.1.7 Create and process graphic elements

1. Creation of a graphic element:
(Example.:A rectangle should be created)
Proceeding:
 Press on the drawing tool <Rectangle> (1).
 Click in the grid of the input field on the requested start point (2).
 The requested start point is placed and is marked red. At the same time on the
display <Coordinates> (4) the coordinates of the start points are shown and on the
display <Activities to carry out> (3) you can see the next required or possible
activity.
 Now click in the grid on the requested position of the end point (5). The rectangle is
now created.
Figure 44
Graphic editor (Create graphic)
1
1 – Drawing tool <Rectangle>
2 – Start point
3 – Display <Activities to carry out>
JET2 neo
Data entry/Programming
4
2
3
5
4 – Display <Coordinates>
5 – End point (Rectangle)
Release R1.12 en
Page 95
4
3