Monitoring Functions; Figure 127 Monitoring Functions - Leibinger JET2NEO Manual

Page 200

8.5.2.2.3 Monitoring functions

Two monitoring functions are available. Monitoring functions are especially required for
high printing speeds.
Figure 127
Monitoring functions
PrintGo-monitoring:
If the function is activated it is monitored if every Print-Go signal can be
processed.If a signal can be not processed, a certain error message is generated.
Example:
A PrintGo is generated and is printed. The next PrintGo is generated; if the printing
process is not finished yet, an error message is generated on the display.
StrokeGo-monitoring:
If the function is activated, the stroke output is monitored, that means if the
StrokeGo-signal is generated faster than the printer can output the several strokes,
an error message is also generated.
Example:
If the production speed with the set parameters is too high, stroke errors can be caused.
The following error message appears on the display:
Release R1.12 en
Job editor Group 8
JET2 neo