Edit Current Job; Open Job To Edit; Figure 32 Create A New Job - Leibinger JET2NEO Manual

Page 78
Figure 32
Create a new job
1
1 – Button <Create new job>
You will find further information regarding the operation of the job editor
in the group Job editor.

7.2.1.2 Edit current job

With the option <Edit current job> you can edit the current job.
Further information about the procedure can be found in the chapter Edit
current job (Direct selection) (page 168) and in the group Job editor!

7.2.1.3 Open job to edit

With the option <Open job to edit> you can open an existing job for editing. For selection
of a job the window „Job selection" is faded in.
Proceeding:
 Press the button < Open job to edit> (1). The window <Job selection> (2) is faded
in.
 Select the requested job in the selection field <Job list> (3). With the pop-up window
<Search in> (4) you can select the various memory locations.
 The name of the selected job is now shown on the display <Filename> (5). Additionally
a preview of the printing job is faded in on the display <Job preview> (7).
Release R1.12 en
Data entry/Programming
2 – Menu <Job editor>
Group 7
2
JET2 neo