Group 7
7.2.2.4.1 Product counter settings
Proceeding:
Press on the status field <Product counter> in the basic menu (1) or press the button
<Product counter settings> (2).
The menu „Product counter" (3) is faded in. As standard the register card <Counter>
(4) is activated and the current value of the counter appears in the display „Product
counter" (5).
1. Reset counter
Press the button <Reset> (6) to reset the counter or cancel the process with the
button <Cancel> (7).
Note: The resetting happens without a further safety query.
The „00000" is now displayed in the status field <Production Counter> of the basic
menu.
2. Change counter value
Change the value of the counter with the +/- buttons (8). The value of the counter
is increased or reduced in increments of one by pressing the appropriate key and
the change shown directly on the display (5).
or
Click in the counter display field (5). The number block <Product counter>(9)
opens for input.
Confirm the value change by pressing the button <Set> (10) or cancel the process
with the button <Cancel> (7).
The set value is now displayed in the status field <Production counter> of the basic
menu.
JET2 neo
Data entry/Programming
You will find further information regarding the working with number
blocks in the chapter Number block!
Page 107
Release R1.12 en