DT SWISS SPLINE ROAD 2017 RC 28 Mon Chasseral Technical Manual page 60

Attaching a New Spoke
1. Slide a new spoke through the spoke hole of the
hub.
If the wheel is equipped with the PHR system, consider
2. Screw on a new nipple.
3. Tighten the spoke.
Closing Steps
True the wheel.
Mount tire and if necessary rim tape and tube.
Mount the wheel if necessary.
chap. 5.4, page 44
SPLINE - Technical Manual
®
for more information.
Link
chap. 5.3, page 42
59