Removing the End Cap, Rotor and Spacer
1. Clamp the right end cap (fig. 4-2/8) into a vise.
2. Pull off the wheel, respectively the hub. Take
care that the rotor (fig. 4-2/7) does not fall off.
3. Clamp the left end cap (fig. 4-2/1) into a vise.
4. Pull off the wheel, respectively the hub.
5. Pull the rotor (fig. 4-2/7) off the hub.
6. Pull the spacer (fig. 4-2/6) off the axle.
SPLINE
- Technical Manual
®
35