DT SWISS SPLINE ROAD 2017 RC 28 Mon Chasseral Technical Manual page 21

3. Clamp the axle with the special strap into the
vise.
4. Unscrew the end cap and remove it.
20 mm, 15 mm und 9 mm end caps:

22 mm open-end wrench
QR end caps: 5 mm Allen key

5. Remove the bearing from the axle.
Assembling Bearings and Axle
1. Slightly grease the seating of the bearings and
the inner surface of the hub shell using multip-
urpose grease.
SPLINE - Technical Manual
®
20