DT SWISS SPLINE ROAD 2017 RC 28 Mon Chasseral Technical Manual page 37

Removing Pawls, Spring and Rotor Sealing
1. Remove the spring using a small, flat
screwdriver.
2. Remove the pawls.
3. Remove the rotor sealing.
4. Check the sealing. Change a broken sealing.
Cleaning and Checking the Parts
1. Clean all parts of the hub (see
2. Check all parts for wear and damages.
3. Check the bearings.
If the hub doesn't turn smoothly, change the
bearings (see Technical Manual at
www.dtswiss.com).
).
Cleaning, S.6
SPLINE - Technical Manual
®
36