Converting by Changing the End Caps
Required Material
mounting pin Ø15 mm
DT Swiss multipurpose grease
adapter 100/QR
adapter 100/Ø9
adapter 100/Ø12
NOTICE
Risk of damaging the adapters and the ball bearings!
The mounting pin must not touch the ball bearing while disassembling the adapters.
1. Plug the mounting pin into one of the adapters.
2. Push the mounting pin downwards (see picture).
3. Remove the adapter and the cover.
Specification
HWTXXX00N5290S
HXTXXX00NMG20S
HWGXXX00S3801S
HWGXXX00S3803S
HWGXXX00S6885S
SPLINE
- Technical Manual
®
Amount
1
as required
1
1
1
16