Check The Wi-Fi Connection - Rinnai Neo Series Installation Manual

Check the Wi-Fi connection
When the power is on the Wi-Fi LED should flash and then turn a solid red to
indicate everything is ready for setup via a smart device
sequence with the homeowner, if they are available, as part of the installation
process is testing the Wi-Fi connectivity and correct operation of the fire with
the homeowner. The Wi-Fi app is available on:
• Google play > search Rinnai fire app
• Apple store > search Rinnai fire app
If unable to connect, the Wi-Fi board must be reset.
The reset button is a small hole in the
base of the board, underneath the LED. Using a
paper clip or similar, press and hold the reset button
for 10 seconds.
1 On initial startup the Wi-Fi module in the fire scans for a Wi-Fi
network, and if at first it doesn't work it will only scan again after ten
minutes.
26 | Neo RIB2312 installation guide: 12148-D 04-19
1 . Go through the app
1
2
1. Wi-Fi LED
2. Wi-Fi module reset hole position