INSTALLATION
FIRE TO FLANGE CONNECTION
The below installation step is common to masonry and false fireplace installations. It is CRITICAL
to the safe operation of the fire.
WARNING
Once the fire has been screwed to the zero clearance box or masonry adapter frame, the front face of the frame
and the front flange of the fire should be pulled up hard against each other. There are witness holes in the front
flange of the fire to ensure this happens.
It is critical to ensure that the air and flue seals are correctly compressed. If there is a gap present, there may not
be a proper seal and performance could be affected.
Rinnai
Fixing check
markers
24
SS850 IM