Rinnai Neo Series Installation Manual page 35

Freestanding direct and offset flueing
45 ° bend, maximum of
two per installation
Wall penetration kit
* The end of the flue shall be at least 500 mm from the nearest part of the chimney (AS/NZS 5601.1 6.9.2 (a))
500 mm min.* clearance from any
part of the building, refer p. 30
Recommended clearances from combustibles
10 mm (to allow for contraction and expansion
of the flue pipes)
Flue is built from the ground up. Refer 'installation
overview PDF for the Neo Freestanding flue kits
on www.rinnai.co.nz.
Neo RIB2312 installation guide: 12148-D 04-19 | 35