[1]
Check that the RACKS are in their correct positions and that the GEARS of the RACK ASSEMBLIES
engage with the GEARS of the MAIN DRIVE SHAFT.
MAIN
DRIVE
SHAFT
GEAR
H108_0063BCA
H108_0063BA
The edge of the LEVEL could cause damage to the surface of the ROLLERS.
[2]
Place a LEVEL as shown in the figure. Adjust the LEVELING SCREWS to level the PROCESSOR from
side to side.
18
RACK
ASSEMBLY
GEAR
Figure 20 Positioning the Racks and Gears
Figure 21 Leveling the Processor Side to Side
LEVEL
H048_0102BCA
H048_0102BA
1C0932