Kodak X-Omat 480 RA Processor Installation Instructions Manual page 10

Removing the Processor from the Skid
• The PROCESSOR weighs over 194 kg (427 lb). Use 2 persons when installing the LEVELING
SCREWS and moving the PROCESSOR into position.
• The PROCESSOR is not fastened to the SKID. Use care when moving the SKID.
[1] Move the PROCESSOR, on the SKID, as close as possible to the position of installation.
10
Installing the Processor
PROCESSOR
SIDE
PANEL
SKID
Figure 7 Processor Mounted on Skid
LOWER
ACCESS
PANEL
H108_0017CCB
H108_0017CA
1C0932