Kodak X-Omat 480 RA Processor Installation Instructions Manual page 12

Installing the Light-Tight Gasket
[1] Install the self-adhesive LIGHT-TIGHT
GASKET onto the end of the PROCESSOR
(receiving end or feed end) that will be
against the darkroom wall.
Do not stretch the GASKET.
Installing the Feed Shelf
[1] Install the FEED SHELF. Use the following, but do not tighten the SCREWS.
• 5 WASHERS
• 5 LOCK WASHERS
• 5 SCREWS
12
Figure 10 Installing the Feed Shelf
Figure 9 Installing the Light-Tight Gasket
FEED SHELF
LIGHT - TIGHT
GASKET
H108_0032ACA
H108_0032AA
H108_0137BCB
H108_0319BA
1C0932