Kodak X-Omat 480 RA Processor Installation Instructions Manual page 8

[10] Remove:
• DRYER PANEL
• RECEIVING-END ACCESS PANEL.
[11] Remove the wrapped items from inside the front of the PROCESSOR and keep them for later
installation.
[12] Remove the NON-DRIVE SIDE ACCESS PANEL from the PROCESSOR.
CONTROL PANEL
FEED-END
LOWER ACCESS PANEL
FILM EXIT TRAY
RECEIVING END
ACCESS PANEL
8
Figure 4 Feed-End View of Processor
Figure 5 Receiving-End View of Processor
NON-DRIVE SIDE
ACCESS PANEL
FEED-END
MIDDLE ACCESS PANEL
TOP COVER
DRIVE SIDE
ACCESS PANEL
DRYER PANEL
H108_0137BCA
H108_0319BA
H108_0233BCB
H108_0318BA
1C0932