Serial Group (Sst+Seri?) - Christie TruLife+ Technical Reference

# Status
123 Fan Speed Profile

Serial Group (SST+SERI?)

The Serial Group provides values and fault conditions related to hardware serial numbers for Christie
TruLife+.
# Status
0 Main Control Board S/N
3 Formatter-Red S/N
4 Formatter-Green S/N
5 Formatter-Blue S/N
14 Housekeeping Board S/N
15 Keypad Display S/N
67 VOM S/N
Christie TruLife+ Technical Reference–Status System
020-103327-03 Rev. 1 (04-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
State Value
<value> RPM - High RPM
<value> RPM - Low RPM
<value> RPM - High RPM
<mode>
State Value
<serial number>
Missing S/N
<serial number>
N/A
Missing S/N
<serial number>
Unknown
Missing Serial Number
<serial number>
Unknown
Christie TruLife+ status system
Description
Pump is running above expected
RPM.
Pump is running under critical
RPM.
Pump is running above critical
RPM.
Reflects the fan mode: Standard
or Quiet.
Description
Displays the electronic serial
number of the main control board.
Cannot retrieve the value because
the serial number was not
programmed into the board
correctly.
Displays the electronic serial
number of the formatter.
The information is not currently
available (card not present or not
powered).
Cannot retrieve the value because
the serial number was not
programmed into the board
correctly
Displays the electronic serial
number of the board.
The serial number is unavailable
because the board is not ready.
Cannot retrieve the value because
the serial number was not
programmed into the board
correctly.
Displays the electronic serial
number of the board.
The serial number is unavailable
because the board is not ready.
22