Table of Contents
Advertisement
Temperature Group (SST+TEMP?)
The Temperature Group provides values and fault conditions for temperature-related items in Christie
TruLife+.
#
Status
2
Air Intake Temperature
4
Main Control Board Temperature
6
Image Processor Scaler Temperature
10
Formatter-Red Temperature
11
DMD Waterblock Temperature
12
Formatter-Green Temperature
14
Formatter-Blue Temperature
20
Housekeeping Board Temperature
29
Main Control Board FPGA Temperature
123
VOM FPGA Temperature
124
Power Supply Temperature
Cooling Group (SST+COOL?)
The Cooling Group provides values and fault conditions related to cooling and fans for Christie TruLife
+.
#
Status
3
Formatter-Green (Fan 4)
6
Cave Blower Fan (Fan 102)
Christie TruLife+ Technical Reference–Status System
020-103327-03 Rev. 1 (04-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
State
Value
<value> °C
Unknown
<value> °C - Low
Temperature
<value> °C - High
Temperature
<value> °C - Too Hot
(shutdown)
Communication Fault
(shutdown)
<value> °C - Too Cold
(shutdown)
State
Value
<tach> RPM
<%max>% - <tach> RPM
Off
Unknown
Off - Overridden
<tach> RPM - Overridden
Christie TruLife+ status system
Description
Displays the current
temperature of the sensor.
Temperature reading is
unavailable.
Temperature is sitting inside
the warning band.
Temperature is sitting inside
the warning band.
Temperature is exceeding the
error threshold.
Cannot retrieve the
temperature from sensor.
Temperature is below the
error threshold.
Description
Displays the current tachometer
reading, if fan has not gone
through fan calibration step.
Displays current tachometer
reading and percentage of
maximum speed determined at
calibration.
Fan is off.
The tachometer reading is
unavailable.
Fan is off. The fan speed has been
changed from its default
recommended value.
Fan is on. The fan speed has been
changed from its default
recommended value.
20
Advertisement
Table of Contents
