Version Group (Sst+Vers?) - Christie TruLife+ Technical Reference

# Status
Laser Tec X Driver Volts
Laser Tec X Driver Temp
306 Ambient Temperature

Version Group (SST+VERS?)

The Version Group provides values and fault conditions related to software and hardware versions for
Christie TruLife+.
# Status
0 Main Control Board SW Version
1 Main Control Board HW Version
4 Formatter-Red HW Version
5 Formatter-Green HW Version
6 Formatter-Blue HW Version
17 Power Supply HW Version
Christie TruLife+ Technical Reference–Status System
020-103327-03 Rev. 1 (04-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
State Value
<value> V
<value> V
<value>°C
<value>°C
<value>°C
<value>°C
State Value
<version>
Unknown
<name>.<level>.<mod>
Detection Fault
<name>.<level>.<mod>
N/A
<model>.<version>.<name>
Christie TruLife+ status system
Description
Displays the current voltage of the
sensor.
Voltage exceeds the warning threshold.
Displays the current temperature of the
sensor.
Temperature exceeds the warning
threshold.
Displays the current temperature of the
sensor.
Temperature exceeds the warning
threshold.
Description
Displays the software version
running on the main control
board.
Cannot determine the software
version information.
<name> = Short name of the
board
<level> = Version of the board
<mod> = Modification level of
the board
Failed to read the board type
information.
<name> = Short name of the
board
<level> = Version of the board
<mod> = Modification level of
the board
This information is cached while
the projector is in standby.
The formatter has never been
turned on or initialized.
The version information of the
48V power supply.
18