Table of Contents
Advertisement
#
Status
105 CSB DAC Calibration
107 LiteLOC Sensor to
Screen Calibration
108 LiteLOC LOS to Sensor
Calibration
109 LaserCrossPlugDetect
110 Laser Reds
111 Laser Greens
112 Laser Blues
113 Laser Tecs
114 Laser Cold Plate Temp
115 Laser LOS Temp
116 Laser LOS Humidity
Christie TruLife+ Technical Reference–Status System
020-103327-03 Rev. 1 (04-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
State
Value
Power.Standby
Power.Halt
OK
OK
Achieve additional
performance by performing
Sensor to Screen calibration
OK
OK
<description of failure>
<value>
<value>
<value>
<value>
<value>°C
<value>°C
<value>°C
<value>°C
<RH value> %
<RH value> %
Christie TruLife+ status system
Description
Lasers will start getting ready to turn on
when the lasers have cooled down
sufficiently.
A critical hardware issue exists. The
laser subsystem remains off until the
issue is resolved and the system s AC
power cycled.
The color sensor board (CSBD) DAC
calibration exists.
LiteLOC sensor-to-screen calibration
exists.
LiteLOC sensor-to-screen calibration
does not exist.
LiteLOC LOS-to-screen calibration exists.
Lasers are wired correctly.
Lasers are wired incorrectly and cannot
power on.
Displays the health status of the red
lasers.
Displays the health status of the green
lasers.
Displays the health status of the blue
lasers.
Displays the health status of the TECs.
Displays the temperature inside the LOS.
Temperature exceeds the warning
threshold.
Displays the temperature inside LOS.
Temperature exceeds the warning
threshold.
Displays the humidity in the LOS.
Humidity exceeds the warning threshold.
14
Advertisement
Table of Contents
