Table of Contents
Advertisement
Installing the Device
2.2 Unpacking the Device
equipment ratings. Make sure to review all operating and installation instructions
before commissioning or performing maintenance on the device.
Review the relevant certification information for any regulatory
1.
requirements.
For more information, refer to
2.
Unpack and inspect the device.
For more information, refer to
3.
Mount the device.
For more information, refer to
4.
Connect the failsafe alarm relay.
For more information, refer to
12)".
5.
Connect power and ground the device.
For more information, refer to
Connect the device to the network.
6.
For more information, refer to
19)".
Configure the device.
7.
For more information, refer to
2.2
Unpacking the Device
When unpacking the device, do the following:
1.
Inspect the package for damage before opening it.
2.
Visually inspect each item in the package for any physical damage.
3.
Verify all items are included.
IMPORTANT
If any item is missing or damaged, contact Siemens for assistance.
2.3
Installing the Device in Hazardous Locations
The RUGGEDCOM RSG907R is designed to comply with the safety standards for Class
I, Division 2, Zone 2 hazardous locations where concentrations of flammable gases,
vapors or liquids may be present, as opposed to normal operating environments.
6
All manuals and user guides at all-guidesbox.com
"Approvals (Page
"Unpacking the Device (Page
"Mounting the Device (Page
"Connecting the Failsafe Alarm Relay (Page
"Connecting Power (Page
"Connecting the Device to the Network (Page
"Configuring the Device (Page
37)".
6)".
8)".
14)".
26)".
RUGGEDCOM RSG907R
Installation Manual, 02/2021, C79000-G8976-1387-12
Advertisement
Table of Contents
