Restricted Software Breakpoints - Analog Devices EZ-KIT Lite Manual

VisualDSP++ Interface
Table 1-7. Core Hang Operations
Option
Abort
Retry
Ignore
Clear
Acknowledge
Reset

Restricted Software Breakpoints

The EZ-KIT Lite development system restricts breakpoint placement
when certain conditions are met. That is, under some conditions, break-
points cannot be placed effectively. Such conditions depend on bus
architecture, pipeline depth, and ordering of the EZ-KIT Lite and its tar-
get processor.
1-16
Description
Abort the hung operation. This causes the offending instruction to be
aborted in the pipeline.
Allows you to remedy the hung operation. For example, if a host proces-
sor is holding off the processor, you can cause the host to clear the hung
condition.
Performs a software reset on the target board.
Aborts the hung operation. This causes the offending instruction to be
aborted in the pipeline.
Allows you to remedy the hung operation. For example, if a host proces-
sor is holding off the processor, you can cause the host to clear the hung
condition.
Performs a software reset on the target board.
ADSP-21161N EZ-KIT Lite Evaluation System Manual