Analog Devices EZ-KIT Lite Manual page 38

VisualDSP++ Interface
Figure 1-2. Target Options Dialog Box
Table 1-4. While Target is Halted Options
Option
Stop I/O DMA Stops IO DMAs in emulator space. This option disables DMA requests when
Table 1-5. On Emulator Exit Options
Option Description
On Emulator Determines the state the processor is left in when the emulator relinquishes con-
Exit trol of the processor:
Reset DSP and Run causes the processor to reset and begin execution from its
reset vector location.
Run from current PC causes the processor to begin running from its current
location.
1-14
Description
the emulator has control of the processor. Data in the EP, LINK, or SPORT
DMA buffers are held there unless the internal DMA request was already
granted. This option holds off incoming data and ceases outgoing data. Because
SPORT-receive data cannot be held off, it is lost, and the overrun bit is set. The
direct write buffer (internal memory write) and the EP pad buffer are allowed
to flush any remaining data to internal memory.
ADSP-21161N EZ-KIT Lite Evaluation System Manual