Example Programs; Flash Programmer Utility - Analog Devices EZ-KIT Lite Manual

Example Programs

connect to
ADC2
input mode selection jumpers, See
(JP7–8)" on page 2-8
The
Line-Out
AD1836 and AD1852.
The CS8414 includes an error flag (
put may not be valid. This signal connects to a LED (
This signal may also be used by interpolation filters to provide error
correction.
Example Programs
Example programs are provided with the ADSP-21161N EZ-KIT Lite to
demonstrate various capabilities of the evaluation board. These programs
are installed with the EZ-KIT Lite software and can be found in the
\...\211xx\EZ-KITs\ADSP-21161N\Examples
alDSP++ installation directory. Please refer to the readme file provided
with each example for more information.

Flash Programmer Utility

The ADSP-21161N EZ-KIT Lite evaluation system includes a Flash Pro-
grammer utility. The utility allows you to program the flash memory on
the EZ-KIT Lite. The Flash Programmer is installed with VisualDSP++.
Once the utility is installed, it is accessible from the Tools pull-down
menu.
For more information on the Flash Programmer utility, go to online Help.
1-12
on the AD1836. This input is configured though the
for more information.
jacks connect to the left and right DAC outputs of the
ADSP-21161N EZ-KIT Lite Evaluation System Manual
"ADC2 Input Mode Selection Jumpers
) to indicate that the audio out-
VERF
subdirectory of the Visu-
) on the board.
LED9