Visualdsp++ Interface; Boot Load; Target Options; While Target Is Halted And On Emulator Exit Options - Analog Devices EZ-KIT Lite Manual

VisualDSP++ Interface

This section provides information about the following parts of the Visu-
alDSP++ graphical user interface:
• "Boot Load" on page 1-13
• "Target Options" on page 1-13
• "Core Hang Conditions" on page 1-15
• "Restricted Software Breakpoints" on page 1-16

Boot Load

Choosing Boot Load from the Settings menu runs the processor and per-
forms a hard reset on the board. This command saves you from having to
shut down VisualDSP++, reset the EZ-KIT Lite board, and bring up Visu-
alDSP++ again when you want to perform a hard reset.
Use this feature when loading debug boot code from an external part or
when you want to put the device into a known state.

Target Options

Choosing Target Options from the Settings menu opens the Target
Options dialog box
aspects of the processor on the ADSP-21161N EZ-KIT Lite evaluation
system.

While Target is Halted and On Emulator Exit Options

This target option controls the processor's behavior when VisualDSP++
relinquishes processor control (for example, when exiting VisualDSP++).
The options are detailed in
ADSP-21161N EZ-KIT Lite Evaluation System Manual
(Figure 1-2). Use target options to control certain
Table 1-4 and
Using EZ-KIT Lite
Table 1-5.
1-13