Symbols - Bosch Rexroth Automax 100 Series Operating Instructions Manual

2/54 About this documentation | Automax 100 | Basic module TS-AC B1-M2-1X
Bosch Rexroth AG | 04.2021 | DOK-SUPPL*-TS-AC B1-M2-ITRS-EN-P
Type and source of danger
Consequences of non-compliance
 Hazard avoidance measures
 <List>
 Warning sign: Draws attention to the danger
 Signal word: Indicates the seriousness of the danger
 Type and source of danger: Designates the type and source of danger
 Consequences: Describes the consequences of non-compliance
 Precautions: Specifies how the danger can be prevented
Risk classes according to ANSI Z535.6-2006
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
1.3.2

Symbols

The following symbols indicate notes which are not safety-relevant but increase the
comprehensibility of the documentation.
Meaning of symbols
Symbol Meaning
If this information is not observed, the product cannot be optimally used and/or
operated.
Tip, general note, useful additional information
Observe instructions on disposal and environmental protection

Enumeration
SIGNAL WORD
Meaning
Indicates a dangerous situation which may cause death or
severe personal injuries if not avoided
Indicates a dangerous situation which may cause death or
severe personal injuries if not avoided
Indicates a dangerous situation which may cause minor to
medium personal injuries if not avoided
Indicates damage to property: The product or the
environment could be damaged