Table of Contents
Advertisement
Scope of delivery | Automax 100 | Basic module TS-AC B1-M2-1X
Scope of delivery
The following table lists all components that are included in the scope of delivery of the
basic module TS-AC B1-M2-1X.
The term „not included in the scope of delivery" refers exclusively to this table.
Regardless of this, additional components may be included in a device set in which this
basic module is included.
Scope of delivery
Quantity
Mat.-No.:
1
R901540131
1
1827003218
1
1827003219
1
R911405746
1
---
1
R901540429
1
R901540428
4.1
Delivery condition
On delivery, the product is ready for operation. For operation, a suitable voltage source is
required. For further specifications and details on connection, refer to the following chapters.
Designation
Basic module TS-AC B1-M2-1X
Basic module with network switch
Measuring line TS-EC-1000 MM-RD
Contact-protected measuring line, 4 mm, red, according to IEC EN
61010-031 (measurement category CAT II)
Measuring line TS-EC-1000 MM-BU
Contact-protected measuring line, 4 mm, blue, according to IEC
EN 61010-031 (measurement category CAT II)
Connector XVB-4/19
nsulated connector, Ø 4 mm, according to IEC EN 61010-031 of
measurement category CAT II, connector width 19 mm
Master sheet / Scope of delivery
DOK-SUPPL*-TS-AC B1-M2-ITRS-EN-P
Operating instructions (English)
DOK-SUPPL*-TS-AC B1-M2-ITRS-DE-P
Operating Instruction (German)
Bosch Rexroth AG | 04.2021 | DOK-SUPPL*-TS-AC B1-M2-ITRS-EN-P
15/54
Advertisement
Table of Contents
