Product And Technology-Dependent Safety Instructions; Introduction; Hazards By Improper Use; General Information - Bosch Rexroth Automax 100 Series Operating Instructions Manual

Table of Contents

Advertisement

Safety instructions | Automax 100 | Basic module TS-AC B1-M2-1X
2.6

Product and technology-dependent safety instructions

2.6.1

Introduction

The following notes must be read before the first commissioning of the system to avoid
physical injury and/or damage to property. These safety instructions must be observed at all
times.
Do not attempt to install or commission this device without first reading all documentation
provided with the system. Please contact your responsible Bosch Rexroth customer service
in case you are not provided with any user information.
If the device is resold, rented and/or passed on to others in any other form, these operating
instructions must be handed over, as well.

2.6.2 Hazards by improper use

Hot surfaces possible on device housings!
Risk of injury! Risk of burning!
Risk of injury by improper handling!
Injury due to crushing, shearing, hitting or incorrect handling!

2.6.3 General information

 In case of damage due to non-compliance with the warnings in these operating
instructions, Bosch Rexroth AG will not accept any liability
 Before the commissioning, the operating, maintenance and safety instructions are to be
read. If you have not understood the documentation in the available language, please
contact your responsible Bosch Rexroth customer service
 The unobjectionable and safe operation of this device requires appropriate and proper
transport, storage, assembly and installation as well as careful operation and
maintenance
 You must observe the safety regulations and provisions of the country where the device
is used.
 The environmental conditions specified in the product documentation must be observed
 Technical data as well as connection and installation conditions are available in the
operating instructions and must always be observed
2.6.4
Protection by means of protective extra low voltage (PELV) against
electric shock
All connections and terminals on this Bosch Rexroth product are for protective extra low
voltage, designed to be safe to touch in accordance with product standards.
CAUTION
CAUTION
Bosch Rexroth AG | 04.2021 | DOK-SUPPL*-TS-AC B1-M2-ITRS-EN-P
7/54

Advertisement

Table of Contents
loading

This manual is also suitable for:

Basic module ts-ac b1-m2-1x

Table of Contents