General Instructions Concerning Property Damage And Product Damage - Bosch Rexroth Automax 100 Series Operating Instructions Manual

General instructions concerning property damage and product damage | Automax 100 | Basic module TS-AC B1-M2-1X
General instructions concerning property
damage and product damage
Risk of fire due to overheating!
Risk of fire
 Ventilation of the device must not be obstructed by covering the ventilation openings
with objects like documents, notes, etc.
 You should ensure extensively dimensioned air circulation around the device. You can
thus prevent possible damage at the device as well as risk of fire due to overheating.
 Open fires must be kept away from the device at all times.
Danger due to improper handling!
Damage to property
 The product may only be operated according to the intended use.
Contamination by foreign bodies!
Premature wear and malfunctions
 During assembly, provide for cleanliness in order to prevent foreign bodies from getting
into the basic module TS-AC B1-M2-1X and causing malfunctions.
 Before commissioning, ensure that all electric and mechanical connections have been
made.
Energized system!
Damage to property
 Do not remove any electric connections as long as the training system and the exercise
setup are connected to the power supply.
 Make sure that suitable external voltage supply (power supply unit) is available.
The warranty only applies to the supplied configuration. The claim to warranty expires if the
product is assembled, commissioned and operated incorrectly, as well as used and/or
handled improperly.
DANGER
NOTICE
NOTICE
NOTICE
Bosch Rexroth AG | 04.2021 | DOK-SUPPL*-TS-AC B1-M2-ITRS-EN-P
13/54