Connecting The Power Supply - U; A Externally Supplied - Bosch Rexroth Automax 100 Series Operating Instructions Manual

Assembly | Automax 100 | Basic module TS-AC B1-M2-1X
The actions are illustrated in the following figure.
1 Contact-protected measuring line 4
mm, blue (mat.-no.: 1827003219)
2 Contact-protected measuring line 4
mm, red (mat.-no.: 1827003218)
Connection of basic module to external power supply unit
The power supply of the basic module is established.
7.4.2 Connecting the power supply – U
ATTENTION! For external voltage supply of the actuator technology (U
from this series of training systems may be used.
Information on the electrical connection can be found in the specifications of the modules to
be combined with the basic module.
3 Insulated connector 4 mm, connector
width 19 mm (mat.-no.: R911405746)
externally supplied
A
Bosch Rexroth AG | 04.2021 | DOK-SUPPL*-TS-AC B1-M2-ITRS-EN-P
29/54
), only modules
A