Table of Contents
Advertisement
26/54
Assembly | Automax 100 | Basic module TS-AC B1-M2-1X
Bosch Rexroth AG | 04.2021 | DOK-SUPPL*-TS-AC B1-M2-ITRS-EN-P
7.2
Installation conditions
The basic module is intended for use in office, laboratory, training and instruction
environments. The admissible environmental conditions are listed in the following table.
Installation conditions for basic module TS-AC B1-M2-1X
Designation
Min. operating temperature
Max. operating temperature
Place of installation
Ambient temperature
Max. relative air humidity
Max. installation height
Supply voltage / external
power supply unit
A-weighted continuous sound level (at workplace of operating personnel)
1)
Micro-fuse 5 mm x 20 mm, 6.3 A, version mT (G fuse insert according to IEC 127-2-2).
2)
Recommended by Bosch Rexroth for operation of the basic module up to its performance limits.
7.2.1
Installation position
The product may only be used horizontally. The basic module TS-AC B1-M2-1X must be set
up on a stable and level surface. Additionally, it must be ensured that sufficient workspace is
available around the module for technical or training documentation. Detailed information
can be found in chapter
„Operator
7.3
Required accessories
High electric voltage by incorrect connection!
Danger to life, risk of injury by electric shock!
At all connections and terminals of this product, only devices, electric components and
lines with protective extra low voltage (PELV) may be connected.
All power sources for protective extra low voltage must ensure secure separation from
dangerous voltages. These include:
–
Accumulators
–
Safety transformers according to VDE 0551
–
Power sources with protection properties like functional low voltage with secure
separation (PELV)
For assembly of the basic module TS-AC B1-M2-1X, an external power supply unit for DC
24 V voltage supply is required. This is not included in the scope of delivery of the basic
module. The Bosch Rexroth power supply unit listed in the following table can be used for
the basic module TS-AC B1-M2-1X.
Voltage (DC)
2)
Current
Module fuse protection
1)
workstations" as of page [12].
WARNING
Unit
Valve
℃
0
℃
+40
---
Closed room
℃
+0 to +40
%
90 at 20 ℃
m
3000 above sea
level
24
24 (±10%)
6.5
6,5
6.3
6,3
dB
0
Advertisement
Table of Contents
