Table of Contents
Advertisement
8/54
Safety instructions | Automax 100 | Basic module TS-AC B1-M2-1X
Bosch Rexroth AG | 04.2021 | DOK-SUPPL*-TS-AC B1-M2-ITRS-EN-P
High electric voltage by incorrect connection!
Danger to life, risk of injury by electric shock!
At all connections and terminals of this product, only devices, electric components and
lines with protective extra low voltage (PELV) may be connected.
All power sources for protective extra low voltage must ensure secure separation from
dangerous voltages. These include:
–
Accumulators
–
Safety transformers according to VDE 0551
–
Power sources with protection properties like functional low voltage with secure
separation (PELV)
2.6.5 Protection against contact with hot parts
Hot surfaces possible on device housings!
Risk of injury! Risk of burning!
Do not touch housing surfaces near sources of heat! Risk of burning!
Before touching, first allow devices to cool down for 10 minutes after switching off.
Touching hot equipment parts such as device housings in which cooling elements and
resistors are located can lead to burns!
2.6.6 Protection during handling and assembly
Risk of injury by improper handling!
Bodily injury by bruising, shearing, cutting, hitting!
Observe the general construction and safety regulations on handling and assembly.
Use suitable assembly and transport equipment.
Avoid jamming and bruising by appropriate measures.
If necessary, use suitable protective equipment (for example safety goggles, safety
shoes, protective gloves).
2.7
Personal protective equipment
The personal protective equipment for users of the product consists of:
Safety shoes during teaching
All parts of the personal protective equipment must be in full working order.
2.8
Obligations of the operator
2.8.1
General information
The operator of the product is to provide for personnel training on the following subjects on a
regular basis:
WARNING
CAUTION
CAUTION
Advertisement
Table of Contents
