Sony WALKMAN MZ-R909 Operating Instructions Manual page 98

On the remote control
1 Insert a disc which has group settings
into the recorder and play the disc.
2 Press DISPLAY for 2 seconds or more,
turn the control towards . or N>
until "GROUP" flashes in the display,
and then press x.
3 Turn the control towards . or N>
until "GROUP ON" flashes in the
display, and then press x.
The elapsed time of the track and "G"
(group mode) appears in the display and
then group mode turns on.
Playback stops at the end of the last
track in the selected group.
For details on selecting another group, see
"Selecting and playing desired groups
(Group skip function)" (this page).
To turn off the Group function
On the recorder, press GROUP for 2
seconds or more again.
On the remote control, select "GROUP
OFF" in step 3, and then press x.
Note
In group mode, the recorder treats all tracks
without group settings as belonging to the last
group on the disc. The last group is indicated
in the display window on the recorder as
"Group – –." Within a group, the tracks
appear in their order on the disc, not their
order within the group.
Selecting and playing desired
groups (Group skip function)
With a disc which has group settings, you
can skip from the currently playing group
to any other group on the disc. You can
select a desired group directly using the jog
dial on the recorder.
On the recorder
1 Insert a disc which has group settings
into the recorder and play the disc, and
then press GROUP slightly.
The group skip mode turns on.
2 Within 5 seconds, turn the jog dial to
select your desired group, and then
press the jog dial.
The recorder starts playing from the first
track in the group.
98
On the remote control
1 Insert a disc which has group settings
into the recorder and play the disc.
2 Press and hold PLAYMODE until
"– – –" flashes in the display.
The group skip mode turns on.
3 Within 5 seconds, turn the control
towards . or N> to select your
desired group.
During playback on group mode,
playback of the desired group starts
with the first track in the group and
stops with the last track in the group.
During normal playback, playback of
the selected group starts with the first
track in the group and stops with the
last track on the disc.
Notes
• If no operation is performed within 5
seconds after step 1, the group skip mode
will be canceled and you will not be able to
perform step 2 thereafter. To continue with
step 1 at this point, repeat from the
beginning of the procedure.
• The group skip mode cannot be used with a
disc that has no group settings.
Changing a play mode
See the illustrations in Japanese text (pages 42
to 44).
Steeings can be stored to the Personal Disc
Memory.
On the recorder
Selecting a play mode
1 While the recorder is playing, press the
jog dial, turn until "PLAY MODE"
flashes in the display, and then press the
dial again.
2 Turn the jog dial to select the play mode,
and then press the dial.
Each time you turn the dial, the play
mode changes and when you press the
dial to select, indication appears in the
display as follows.