Sony WALKMAN MZ-R909 Operating Instructions Manual page 104

3 To label a track, press the jog dial while
" : Name" is flashing.
To label a group, turn the jog dial until
" : Name" flashes in the display, and
then press the dial.
The track or group is ready to be
labeled.
4 Follow steps 4 to 6 of "Labeling a disc
during stop."
Labeling a track, a group, or a disc
during recording
To label a group, you must first turn the
group mode on before the start of
recording (page 92).
1 While recording, press the jog dial, turn
the dial until "EDIT" flashes in the
display, and then press the dial again.
" : Name" flashes in the display.
2 To label a track, press the jog dial while
" : Name" is flashing.
To label a group, turn the jog dial until
" : Name" flashes in the display, then
press the dial.
To label a disc, turn the jog dial until
" : Name" flashes in the display,
then press the dial.
The track, group, or disc is ready to be
labeled.
3 Follow steps 5 to 7 of "Labeling a disc
during stop".
To cancel labeling
Press CANCEL to cause "CANCEL?" to
light up and "PushENTER" to flash in the
display, and then press the jog dial.
On the remote control
Labeling a disc during stop
To label a disc that contains group settings,
you must turn the group mode on before
doing the labeling procedure.
1 Insert a disc.
2 Press DISPLAY for 2 seconds or more.
3 Turn the control towards . or N>
until "EDIT" flashes in the display, and
then press x.
" : Name" flashes in the display.
104
4 Press x.
The disc is ready to be labeled.
5 Turn the control towards . or N>
to select a letter and press x to enter.
The selected letter stops flashing and the
cursor moves to the next input position.
Buttons Functions
(Press/Turn)
X
To switch between
katakana, the alphabet
(capital letters and small
letters), symbols/numbers,
and phrases.
Control To move the cursor to the
(VOL +/–) left or right.
Control To change the letter to the
(./N>) one before/next one.
DISPLAY To insert a blank space to
type in a new letter (Press
within 2 seconds).
To cancel labeling by (Press
for 2 seconds or more).
PLAYMODE To delete a letter and move
back all following letters to
the left.
6 Repeat step 4 and enter all characters of
the label name.
7 Keep pressing x for 2 seconds or longer.
The track or disc is labeled.
Labeling a track or a group during
playback
1 To label a track, insert a disc and play
the track you want to label.
To label a group, insert a disc, turn the
group mode on, and play the group you
want to label (page 98).
2 Press DISPLAY for 2 seconds or more.
3 Turn the control towards . or N>
until "EDIT" flashes in the display, and
then press x.
" : Name" flashes in the display.
4 To label a track, press x while "
Name" is flashing.
To label a group, turn the control
towards . or N> until "GP :
Name" flashes in the display, and then
press x.
The track or group is ready to be
labeled.
: