Sony WALKMAN MZ-R909 Operating Instructions Manual page 97

BVarious ways of
playback
Searching for a specific track
or a position quickly (Quick
Search)
See the illustrations in Japanese text (page 39).
You can do two kinds of quick search.
• Index search — Searching quickly while
monitoring the track numbers or track
names.
• Time search — Searching quickly while
monitoring the elapsed time.
Selecting the search mode
The search mode can be selected only on
the remote control while the recorder is
stopped, playing, or play-paused.
1 Press DISPLAY for 2 seconds or more.
2 Turn the control towards . or N>
until "SEARCH" flashes in the display,
and then press x.
3 Turn the control towards . or N>
until "Index"(index search) or
"Time"(time search) flashes in the
display, and then press x.
The recorder is factory set to "Index".
Searching for a specific track
while monitoring track numbers
or track names (Index Search)
To do an index search, do the procedures
"Selecting the search mode" and select
"Index" in step 3.
On the recorder
1 Turn the jog dial until the desired track
appears in the display, and then press
the dial.
The selected track name appears in the
display and the recorder starts playing
by pressing the jog dial.
If the track has no name, the track
number appears in the display.
On the remote control
1 Press X while playing a disc.
2 Turn and hold the control towards .
or N> until the desired track
number or track name appears in the
display.
3 Press X to cancel the pause.
Playback starts from the selected track.
Searching for a specific point
while monitoring the elapsed
time (Time Search)
To do a time search, do the procedures of
"Selecting the search mode" and select
"Time" in step 3.
On the recorder
1 Press X while playing a disc.
2 Keep pressing . or > until the
desired point appears in the display.
3 Press X to cancel the pause.
Playback starts from the selected point.
On the remote control
1 Press X while playing a disc.
2 Turn and hold the control towards .
or N> until the desired point
appears in the display.
3 Press X to cancel the pause.
Playback starts from the selected point.
Using the Group Function
See the illustrations in Japanese text (page 40).
The recorder can operate various playback
with a disc which has group setting.
Listening to tracks in a specific
group (Group mode playback)
On the recorder
1 Insert a disc which has group settings
into the recorder and play the disc.
2 Press GROUP for 2 seconds or more.
" " lights up and the group mode
turns on.
Playback stops at the end of the last
track in the selected group.
For details on selecting another group, see
"Selecting and playing desired groups
(Group skip function)" (page 98).
97