Sony WALKMAN MZ-R909 Operating Instructions Manual page 101

To change playback speed
(Speed Control)
See the illustrations in Japanese text (pages 47
and 48).
The playback speed can be adjusted in 7
steps (80%, 85%, ...100%, 105%, 110%).
Setting can be stroed to the Personal Disc
Memory.
1 Press DISPLAY on the remote control
for 2 seconds or more during playback.
2 Turn the control on the remote control
towards . or N> until "SPEED"
flashes in the display, and then press x
on the remote control.
The recorder changes to speed-setting
mode.
3 Turn the control towards . or N>
to select the playback speed.
"+" shows the normal speed and the
cursor shows the playback speed you
are selecting.
4 Press x to set the playback speed.
"S" appears in the display when the
speed is changed.
Notes
• You cannot change playback speed with the
recorder.
• The playback sound will be affected by the
playback speed.
• All settings will be lost when you remove
the disc from the recorder (except when the
settings of the disc has been stored to the
Personal Disc Memory).
Storing the settings for
individual discs (Personal Disc
Memory)
See the illustrations in Japanese text (pages 48
and 49).
The recorder can store the various settings
for each disc, and then retrieve them
automatically whenever the disc is
inserted. Do the following procedure to
store the volume, playback mode, group
mode playback, playback order, sound
quality (Digital Sound Preset), and
playback speed (Speed control) settings for
a disc.
On the recorder
1 While the recorder is stopped, playing,
or play-paused, press the jog dial.
2 Turn the jog dial until "PERSONAL"
flashes in the display, and then press the
dial.
"Entry?" flashes in the display.
3 Press the jog dial.
"Entry OK" appears in the display and
the disc settings are stored in the
recorder.
On the remote control
1 While the recorder is stopped, playing,
or play-paused, press DISPLAY for 2
seconds or more.
2 Turn the control towards . or N>
until "PERSONAL" flashes in the
display, and then press x.
"Entry?" flashes in the display.
3 Press x.
"Entry OK" appears in the display and
the disc settings are stored in the
recorder.
Erasing the disc information
Insert the disc whose information is to be
erased and verify its contents. Do steps 1 and
2, then turn the jog dial on the recorder or turn
the control towards . or N> on the
remote control until "Erase?" flashes in the
display, and then press the jog dial on the
recorder or x on the remote control. "Erase
OK" appears in the display and the disc
information is erased. If you try to erase the
disc information of a disc that have never been
stored, "No Entry!" appears in the display for
2 seconds.
Notes
• The settings for up to 20 discs can be stored.
Any settings stored afterwards will replace
the settings for the least used disc among the
20.
• If you use another minidisc recorder to edit
or add tracks to a disc whose settings have
been stored on the recorder, the disc will no
longer be recognizable by the recorder and
the stored information will become useless.
101