Sony WALKMAN MZ-R909 Operating Instructions Manual page 106

Retrieving phrases
You can retrieve a phrase stored in the
recorder's memory anytime you want to
use it in a track, group, or disc name.
Note
Phrases stored in the name bank cannot be
retrieved by the procedure described in
"Searching for a phrase by displaying the
stored phrase one by one." To retrieve a
phrase from the name bank, follow the
procedure described in "Searching for a
phrase by its first letter."
Searching for a phrase by displaying the
stored phrase one by one
1 Do the procedure "On the recorder" in
"Labeling recordings" (page 103) until
" :Name," "
Name" flashes in the display. Then press
the jog dial.
2 Press END SEARCH so that the phrase
stored in the recoder's memory appears
in the display.
3 Press x to move the cursor from the
letter input area to the character palette,
and then turn the jog dial until the
desired phrase flashes in the display.
Turning the jog dial causes the phrases
stored in the recoder's memory to
appear one by one in sequential order.
4 Press the jog dial while the phrase you
want flashes in the display.
The phrase is selected and lights up in
the letter input area.
5 Press the jog dial for 2 seconds or more.
The phrase is retrieved.
Searching for a phrase by its first letter
1 When labeling a track, group, or disc,
turn the jog dial in the letter input area
until the first letter of the desired phrase
appears.
2 Press END SEARCH to search so that
the phrase corresponding to the letter
appears.
3 Press x to move the cursor from the
letter input area to the character palette,
and then turn the jog dial until the
desired phrase flashes in the display.
106
:Name," or " :
4 Press the jog dial while the desired
phrase flashes in the display.
The phrase is selected and lights up in
the letter input area.
5 Press the jog dial for 2 seconds or more.
The selected phrase is retrieved.
Erasing phrases
1 While the recorder is stopped, press the
jog dial, turn the dial until "EDIT"
appears, and then press the dial again.
2 Turn the jog dial until "BankErase"
appears, and then press the dial.
3 Turn the jog dial until the phrase you
want to erase appears, and then press
the dial.
"Erase!" appears and the phrase is
erased.
To cancel the operation
Press CANCEL to cause "CANCEL?"
lights up and "PushENTER" flashes in the
display, and then press the jog dial.
On the remote control
Storing phrases into the name
bank (Name Bank function)
1 Press DISPLAY for 2 seconds or more,
turn the control towards . or N>
until "EDIT" flashes in the display, and
then press x.
2 Turn the control towards . or N>
until "Name Bank" flashes in the
display, and then press x.
3 Enter the phrase you want to store, then
press x for 2 seconds or more.
"Entry!" appears in the display and the
phrase is stored.
Storing phrases while labeling
1 Do the procedure "On the remote
control" in "Labeling recordings" (page
104) to enter a phrase.
2 After entering the phrase, press X for 2
seconds or more.
"Entry!" appears in the display and the
cursor flashes after the phrase you just
stored. You can then continue with
labeling operation.