Sony WALKMAN MZ-R909 Operating Instructions Manual page 110

To add track marks while
recording (except while synchro-
recording)
Press T MARK at the point you want to
add a track mark. You can use Auto Time
Stamp to add track marks automatically at
specified intervals (except while digital
recording).
Erasing a track mark
See the illustrations in Japanese text (page 65).
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can erase
a track mark to combine the tracks before
and after the track mark.
1 While playing the track with the track
mark you want to erase, press X to
pause.
2 Find the track mark by pressing .
slightly.
"MARK" appears in the display for 2
seconds.
3 Press T MARK to erase the mark while
"MARK" appears in the display.
"MARK OFF" appears in the display.
The track mark is erased and the two
tracks are combined.
Notes
• When you erase a track mark between the
two tracks that are registered into different
groups, the second track is re-registered into
the group containing the first track. In
addition, if you combine a track that is
registered to a group with a track that is not
registered to a group, the second track takes
the same registration setting as the first
track. However, when the group function is
on, you can only combine tracks within the
selected group.
• You cannot erase track marks according to
the system limitations.
110
Erasing tracks or groups
See the illustration in Japanese text (page 66).
You can quickly erase a recorded tracks, all
the tracks and data of the MD, or groups.
Note that once a recording has been
erased, you cannot retrieve it. Make
sure of the contents you are erasing.
Erasing a track
1 While playing the track you want to
erase, press the jog dial, turn the dial
repeatedly until "EDIT" flashes in the
display, and then press the dial again.
2 Turn the jog dial until "
flashes in the display, and then press the
dial.
"Erase OK?" appears and "PushENTER"
flashes in the display.
3 Press the jog dial again.
The track is erased and the next track
starts to play. All the tracks after the one
erased are automatically renumbered.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part.
Erasing a whole disc
1 While the recorder is stopped, press the
jog dial, turn the dial until "EDIT"
flashes in the display, and then press the
dial again.
2 Turn the jog dial until "
flashes in the display, and then press the
dial.
"AllErase?" appears and "PushENTER"
flashes in the display.
3 Press the jog dial again.
"TOC Edit" flashes in the display, and
all the tracks will be erased.
When erasing is complete,
"BLANKDISC" flashes and "00:00"
appears in the display.
: Erase"
: Erase"