Sony WALKMAN MZ-R909 Operating Instructions Manual page 108

3 Turn the jog dial until the number or
name of the desired first track flashes in
the display, and then press the jog dial.
This selects the first track of the new
group.
Even when the group mode is on, track
numbers appear according to their order
on the disc, not their order within the
group.
4 Turn the jog dial until the number or
name of the desired last track flashes in
the display, and then press the jog dial.
This selects the last track of the new
group.
5 Follow steps 4 to 7 of "Labeling
recordings" (page 103) to label a group.
Notes
• In step 3, the first track must either be the
first track of an existing group or a track that
does not belong to a group.
• When selecting the last track in step 4, make
sure the track comes after the one selected in
step 3. The last track must either be the last
track of an existing group or a track that
does not belong to a group.
To release a group setting
See the illustration in Japanese text (page 61).
1 Press GROUP for 2 seconds or more.
The group mode turns on.
2 Follow steps 1 and 2 of "On the recorder"
in "Selecting and playing desired groups
(Group skip function)" (page 98) and check
the contents of the group you want to
release. Then press x.
3 Press the jog dial, turn the dial until
"EDIT" flashes in the display, and then
press the dial again.
4 Turn the jog dial until "
flashes in the display, and press the jog
dial.
"Release?" appears and "PushENTER"
flashes in the display.
5 Press the jog dial.
The group setting of the selected group
is released.
108
Moving recorded tracks
See the illustrations in Japanese text (page 62).
You can change the order of the recorded
tracks.
On the recorder
1 While playing the track you want to
2 Turn the jog dial until "
3 Turn the jog dial until the destination
4 Press the jog dial again.
On the remote control
1 Press DISPLAY for 2 seconds or more,
2 Turn the control towards . or N>
3 Turn the control towards . or N>
4 Press x.
: Release"
To cancel moving
Press CANCEL on the recorder.
Press DISPLAY for 2 seconds or more on
the remote control.
move, press the jog dial, turn the dial
until "EDIT" flashes in the display, and
then press the dial again.
flashes in the display, and then press the
dial.
The selected track number or name of
the froup that the selected track belongs
flashes in the display. If the track has
been labeled, press > to make the
track name appear in the display. Press
. to display the track number again.
track number flashes in the display.
The track moves to the selected
destination track.
turn the control towards . or N>
until "EDIT" flashes in the display, and
then press x.
until " : Move" flashes in the display,
and then press x.
to select the destination track number.
The selected track moves just before the
destination track.
: Move"