Sony WALKMAN MZ-R909 Operating Instructions Manual page 111

To erase a group
1 Press GROUP for 2 seconds or more.
2 Follow steps 1 and 2 of the procedure
described under "On the recorder" in
"Selecting and playing desired groups
(Group skip function)" (page 98) to
check the contents of the group you
want to erase. Then press x.
3 Press the jog dial, turn the dial until
"EDIT" flashes in the display, and then
press the dial again.
4 Turn the jog dial until "
flashes in the display, and then press the
jog dial.
The group name and "GP Erase?"
appear and "PushENTER" flashes in the
display.
5 Press the jog dial again.
The group is erased.
To cancel erasing
Press CANCEL.
BOther operation
G-PROTECTION function
The G-PROTECTION function was
developed to provide a higher level of
shock resistance than that of existing
players in order to allow the recorder to be
used while jogging.
Note
The playback sound may skip if:
• the recorder receives stronger continuous
: Erase"
• a dirty or scratched MiniDisc is played.
Setting the alarm (Melody
Timer)
See the illustrations in Japanese text (pages 68
and 69).
You can set the alarm to go off in 1 to 99
minutes.
The following sounds can be selected:
"TIMER 1"
"TIMER 2"
"TIMER 3"
On the recorder
1 While the recorder is stopped, playing,
2 Turn the jog dial until "M-TIMER"
3 Turn the jog dial until "ON" flashes in
4 Turn the jog dial repeatedly to select the
5 Press the jog dial.
6 Turn the jog dial repeatedly to select the
shock.
Classical music 1
Classical music 2
Beeps
or play-paused, press the jog dial.
flashes in the display, and press the dial.
the display, and then press the dial.
, lights up in the display and the alarm
sound can be selected.
alarm sound.
The alarm sound is set.
elapsed time.
One rotation of the control changes the
elapsed time setting (TIME :) by 1
minute, within a range of 1 to 99
minutes. To change the time quickly,
keep turning the jog dial.
Continued
111