Sony WALKMAN MZ-R909 Operating Instructions Manual page 103

• If you enter the symbol "//" between the
characters in disc names such as "abc//
def," you may be unable to use the group
function.
About the character palette
The character palette appears in the display
when the recorder is ready to accept
character input.
For configulation of the character palette,
see page 53 in Japanese text.
On the recorder
Labeling a disc during stop
To label a disc that contains group settings,
you must turn the group mode on before
doing the labeling procedure.
1 Insert a disc.
2 Press the jog dial, turn the dial until
"EDIT" flashes in the display, and then
press the dial again.
" : Name" flashes in the display.
3 Press the jog dial again.
The disc is ready to be labeled.
The cursor flashes in the letter input area
and the character palette appears in the
display.
4 Press x to move the cursor form the
letter input area to the character palette.
5 Press . or > repeatedly to select a
letter and press N to enter.
The selected letter appears in the letter
input area and the cursor moves to the
next input position. The buttons used for
character input and their functions are
listed below.
Buttons Functions
(Press/ Turn)
X To move the cursor from the
character palette to the letter
input area.
To move the cursor upward in
the character palette.
x To move the cursor from the
letter input area to the character
palette.
To move the cursor downward
in the character palette.
./> To move the cursor to the left
or right.
N To enter a letter in the
character palette.
To enter the text string in the
letter input area (Press for 2
seconds or more).
VOL + To insert a blank space before
the cursor in the letter input
area.
To move the cursor to the right
in the character palette.
VOL – To delete a letter in the letter
input area.
To move the cursor to the left
in the character palette.
Jog dial To select a character in the
letter input area (Turn).
To scroll the character palette
by turning (Turn).
To enter a letter (Press).
To enter a name (Press for 2
seconds or more).
GROUP/ To cancel labeling in the letter
CANCEL input area.
To m the cursor from the
character palette to the letter
input area,
T MARK To display ":", "–" and "/"
repeatedly at the input position
in the letter input area.
6 Repeat step 4 and 5, and then enter all
characters of the label name.
7 Press down the jog dial for 2 seconds or
more.
The disc is labeled.
Labeling a track or a group during
playback
1 To label a track, insert a disc and play
the track you want to label.
To label a group, insert a disc, turn the
group mode on, and then play the group
you want to label (page 97).
2 Press the jog dial, turn the dial until
"EDIT" flashes in the display, and then
press the dial again.
" : Name" flashes in the display.
Continued
103