2.4.1 Mounting The Device On A Din Rail - Siemens RUGGEDCOM RSG920P Installation Manual

2.4.1 Mounting the Device on a DIN Rail
The RUGGEDCOM RSG920P can be ordered with a DIN rail adapter preinstalled on the
back of the chassis. Use the adapter to mount the device to a standard 35 mm (1.4
in)IEC/EN 60715 or TS35 DIN rail.
Mounting the Device
To mount the device to a DIN rail, do the following:
1.
RUGGEDCOM RSG920P
Installation Manual, 04/2021, C79000-G8976-1172-07
Secure the DIN rail bracket to back of the device chassis.
DIN Rail Bracket
1
Screw
2
Figure 2.2 DIN Rail Bracket Assembly
2.4.1 Mounting the Device on a DIN Rail
1
2
Installing the Device
11