Specifications
For specifications on the available copper Ethernet ports, refer to
Port Specifications (Page
4.2
SFP Transceivers
The RUGGEDCOM RSG920P features four Small Form-Factor Pluggable (SFP)
transceiver sockets, which are compatible with a wide array of SFP transceivers
available from Siemens.
LEDs
Each socket features an LED that indicates its link state.
Green (Solid)
Green (Blinking)
Off
Compatible SFP Transceivers
For more information about which SFP transceivers are compatible with the
RUGGEDCOM RSG920P, as well as instructions for ordering and installation/
removal, refer to the
support.industry.siemens.com/cs/ca/en/view/109482309].
Note
Only use SFP transceivers approved by Siemens for RUGGEDCOM products. Siemens
accepts no liability as a result of performance issues related in whole or in part to
third-party components.
RUGGEDCOM RSG920P
Installation Manual, 04/2021, C79000-G8976-1172-07
33)".
State
RUGGEDCOM SFP Transceiver Catalog [https://
Communication Ports
Pin
Name
10/100Base-
1000Base-
TX
7
Reserved
(Do Not
Connect)
8
Reserved
(Do Not
Connect)
Description
Link established
Activity
No link detected
4.2 SFP Transceivers
Description
TX
BI_DC+
Bi-
Directional
BI_DC-
Bi-
Directional
"Copper Ethernet
29