6.1.2 Csa/Sira; Tüv Süd - Siemens RUGGEDCOM RSG920P Installation Manual

Certification
6.1.2 CSA/Sira
The device is marked with a CSA symbol that indicates compliance with both
Canadian and U.S. requirements.
C
It is specifically approved for use in hazardous locations defined as:
•
•
•
6.1.2 CSA/Sira
This device meets the requirements of the following CSA/Sira standards and is
approved for use in hazardous locations under certificates Sira 15ATEX4324X and
IECEx CSA 16.0005X:
•
•
•
The device is marked with an ATEX marking.
Note
For the maximum ambient temperature, refer to the hazardous location label affixed
to the device.
6.1.3 TÜV SÜD
This device is certified by TÜV SÜD to meet the requirements of the following
standards:
•
38
US
Class I, Division 2, Groups A, B, C, D T4
Ex nA nC IIC T4 Gc
Class I, Zone 2, AEx/Ex nA nC IIC T4 Gc
94/9/EC (ATEX)
ATEX – Directive of the European Parliament and the Council of 23 March 1994
on the Approximation of the Laws of the Member States Concerning Equipment
and Protective Systems Intended for Use in Potentially Explosive Atmospheres
IEC 60079-0, Edition 6.0 (2013)/EN 60079-0:2012
Explosive Atmospheres – Part 0: Equipment – General Requirements
IEC 60079-15, Edition 4.0 (2013)/EN 60079-15:2010
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection N
II 3 G Ex nA nC IIC T4 Gc
CAN/CSA-C22.2 NO. 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National standard, with UL 62368-1)
RUGGEDCOM RSG920P
Installation Manual, 04/2021, C79000-G8976-1172-07