Installing The Device - Siemens RUGGEDCOM RSG920P Installation Manual

Installing the Device

The following sections describe how to install the device, including mounting the
device, connecting power, and connecting the device to the network.
Electrocution hazard – risk of serious personal injury and/or damage to
equipment
Before performing any maintenance tasks, make sure all power to the device has
been disconnected and wait approximately two minutes for any remaining energy
to dissipate.
Radiation hazard – risk of serious personal injury
This product contains a laser system and is classified as a CLASS 1 LASER PRODUCT.
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Fire/electrical/burn hazard – risk of serious personal injury and/or damage to
the device
Do not use any parts that show evidence of damage. If damaged parts are used, the
device may not function according to the specification. Damaged parts can lead to:
•
•
•
•
Burn hazard – risk of personal injury
The surface of the device may be hot during operation, or as a result of the ambient
air temperature.
Wear appropriate personal protective equipment and use caution when working
with or around the device.
RUGGEDCOM RSG920P
Installation Manual, 04/2021, C79000-G8976-1172-07
DANGER
WARNING
WARNING
Injury to personnel
Loss of certification/approvals
Violation of EMC regulations
Damage to the device or other components
CAUTION
2
7