6.1.11 Rohs; Other Approvals - Siemens RUGGEDCOM RSG920P Installation Manual

Certification
6.1.11 RoHS
•
•
The device is marked with an RCM symbol to indicate compliance when sold in the
Australian region.
A copy of the Declaration of Conformity is available via Siemens Industry Online
Support at https://support.industry.siemens.com/cs/ww/en/view/89855782.
6.1.11 RoHS
This device is declared by Siemens AG to meet the requirements of the following
RoHS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
•
A copy of the Material Declaration is available online at
support.industry.siemens.com/cs/ww/en/view/109738831.
6.1.12

Other Approvals

This device meets the requirements of the following additional standards:
•
•
•
•
42
Radiocommunications (Compliance Labelling – Electromagnetic Radiation)
Notice 2003 made under Section 182 of the Radiocommunications Act 1992
Telecommunications Labelling (Customer Equipment and Customer Cabling)
Notice 2001 made under Section 407 of the Telecommunication Act 1997
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic
Information Products
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
IEC 61850-3
General Requirements
IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
NEMA TS-2
Traffic Controller Assemblies with NTCIP Requirements
https://
RUGGEDCOM RSG920P
Installation Manual, 04/2021, C79000-G8976-1172-07