Connecting Low Dc Power - Siemens RUGGEDCOM RSG920P Installation Manual

2.8.2

Connecting Low DC Power

To connect a single or dual power sources to the low DC power supply, do the
following:
When connecting two external power sources, if the first external power source has
a voltage lower than 33 VDC, the second power source must have a voltage lower
than 33 VDC as well. Similarly, if the first power source has a voltage higher than 36
VDC, the second power source must have a voltage higher than 36 VDC.
RUGGEDCOM RSG920P
Installation Manual, 04/2021, C79000-G8976-1172-07
NOTICE
Installing the Device
2.8.2 Connecting Low DC Power
19