Connecting The Ecg Cable; Loading The Thermal Chart Paper (Option); Connecting An External App/Wifi Printer (Option) - EDAN iSe Series User Manual

iSE Series Electrocardiograph User Manual
The patient should not come into contact with conducting objects such as
earth, metal parts etc.
Ensure that the patient is warm and relaxed, and breathes calmly.

2.2 Connecting the ECG Cable

1. Connecting to the electrocardiograph
In the case of DE12, connect the ECG cable to the socket on the right side of the
electrocardiograph. Secure with two screws. (See Figure 11.)
In the case of DE18, connect the DE18 sampling box to the DE18 cable, which is
connected to the socket on the right side of the electrocardiograph. Secure with two
screws. (See Figure 12.)
2. Connecting to the electrodes
Align all lead wires of the ECG cable to avoid twisting, and connect the lead wires to the
reusable electrodes or the electrode adaptors. Firmly attach them.

2.3 Loading the Thermal Chart Paper (Option)

The electrocardiograph uses thermal paper roll.
Make sure that the recorder paper is placed in the center of the recorder, and the paper
edge is parallel with the recorder edge in the advancing direction to avoid paper offset or
extrusion.
Loading/Replacing paper roll:
1. Press down the switch to open the paper door.
2. Remove the remaining paper from the paper tray if necessary.
3. Remove the outer packaging from a new pack of paper, and put the paper into the
tray.
4. Pull the paper out with the grid side facing the thermal print head.
5. Close the door securely.
NOTE:
The exit edge can help you tear the recorder paper.

2.4 Connecting an External APP/WIFI Printer (Option)

Setting Up the Electrocardiograph
CAUTION
- 25 -